APPLICATION DETAILS FOR DECORATIVE STAIN

Available in 9 Standard Colors

DIRECTIONS:  Stain Base is sold separately from the color. Add the Stain Color Concentrate of your choice into the Decorative Base. Add the small size of Concentrate (6 oz.) into the one gallon size of Base. Add the large size of Concentrate (30 oz.) into the five gallon size of Base. Shake. DO NOT ADD WATER. Put into sprayer of your choice. Make sure the Preferred Deck Texture Coat was applied at least 24 hours previously so all of the moisture cures out (48 hours may be necessary on indoor applications. Damp conditions will require longer cure times.) 

Spray an even layer of Decorative Stain to dry surface. Use two or three coats to achieve desired effect.  Allow each coat to dry completely before applying the next. For a lighter version of any particular color, mist the deck first with water. For a marbled (modeled) effect, use a light color first and let dry.  Then spray a darker color while misting with water to assist modeling. Use several colors in this manner if desired, letting each color dry completely.

Once desired effect is achieved, let dry completely.  Roll on or spray two coats of High Gloss Sealer, Southwest Seal, Clear Coat Sealer or Solvent Polyurethane Sealer. Let the first coat dry completely before applying the second.  Use Non-Skid Grip in the last coat if desired.

Follow instructions on the Decorative Stain labels and review the MSDS Sheets for the Stain Base and the Stain Color Concentrate. If you have questions regarding this product, contact Preferred Deck at 888.440.3320.

Click here to download a printable copy of these Application Details.